Copper bus bars' electrical terminals for cable

The electrical terminals for cable allow direct connection of previously stripped flexible cable with cross-section up to 120 mm2 on 5 mm and 10 mm thick solid copper bars, without having to buy and punch them. 

Copper bus bars' electrical terminals for cable

The stripped cable is fitted and tightened on the copper bar by a metal plate, thus preventing to break the wires. Easy and quick to use, the Terminals for Electric Cable allow operations on already fitted copper bar systems without dismantle them to perform the relevant punching.

Advantages

  • Connections on copper bars 5 and 10 mm thick
  • No drilling on copper bar needed, No Lug nor pressed operation needed
  • Fitted and tightened on the copper bar by a metal plate preventing the wires to break
  • For cable cross-sections from 1.5 to 120 mm2
  • Compliant with standard EN 60998-1:2004 European directive 2006/95/EC Low Voltage equipment Directive RoHS

Terminals for cable

Morsetti per cavi su barre di rame piene

CodeReferencePackingH (mm)L (mm)S (mm)Cable Cross Section (mm²)(Nm)
Terminals for 5 mm thick copper Bars
MCR1000MCR 5x16102622121,5 ÷ 163
MCR1005MCR 5x351031291616 ÷ 358
MCR1010MCR 5x701039312135 ÷ 7016
MCR1015MCR 5x1201044342470 ÷ 12024
MCR1017MCR 5x18510504028120 ÷ 18524
Terminals for 10 mm thick copper Bars​​​​​​
MCR1020MCR 10x16103122121,5 ÷ 163
MCR1025MCR 10x351037291616 ÷ 358
MCR1030MCR 10x701043312135 ÷ 7016
MCR1035MCR 10x1201048342470 ÷ 12024
MCR1037MCR 10x18510544028120 ÷ 18524

Morsetto con CLIP - MCR2000

Morsetto con clip MCR2000 Morsetto con clip MCR2000

The galvanized passivated steel Terminal MCR2000, for connections on copper bar with section of 12 x 4 mm, is suggested to be used for flexible cables in a range betweem 1,5 and 16 mm². Easy and quick to use without having to punching. The stripped cable is fitted and tightened on the bar by a metal plate, thus preventing the wire from breaking.

CodeReferencePackingBar Sect.N° of cablesCable Sect. (mm²)N(m)
MCR2000MCR 4x121012x411,5 ÷ 163

Spider connector for threaded bars

Connettore a ragno per barre filettate MCR1100 Connettore a ragno per barre filettate MCR1100

Passivated galvanized steel. Connections: 1 or 2 cables from 1.5 to 10 mm2. Complete with screw M5x12. Easy and quick to use. Indirect tightening thus preventing the wire from breaking.

 

CodeReferencePackingBar Sect.N° of cablesCable Sect. (mm²)(Nm)
MCR1100MCR 4xM510012x4 - 12x51 ÷ 21,5 ÷ 103