Application advantages
- The simplicity of the tools ensures they are safe and easy to use.
- quick, accurate work, optimization of connection lengths.
- no need for an external power supply
- easy to carry out work "on site"
- easy to fit on a workbench
Hand tool to bend and to twist insulated flexible bars
The tool makes it possible to create the optimal bending angles, even with pre-determined and/or repeated angles. It also allows the user to optimize the connection length as well as the overall dimensions and to twist flexible bar to obtain various planes of connection.
Bending
- Can be used on flexible bars up to 120x10x1 cross-sections
- Easy to fit on a workbench
- Quick flexible bar tightening
- Goniometer to set the bending angle
- Blocking for repeated work on the same bending angle
- No damage to the insulation
- Little effort required thanks to the lever
Twisting
- Can be used up to 120x10x1 cross-sections.
- Allows twisting of the insulated flexible bar without damaging the insulation, to get a change in the plane of connection.
Code | Reference | Packing | Weight (Kg) | H (mm) | P (mm) | L (mm) |
---|
UBF1005 | UPB-T-BFX | 1 | 14,4 | 220 | 350 | 220 |
Hand tool to drill insulated flexible bars
The drilling tool allows optimal drilling of the terminal destined to the connection, by simply using it with a column or hand drill. The hole is clean, without burr or deformation of the copper laminate, since the laminate package is pressed under a special drilling guide.
- For holes: Ø 6.5 – Ø 8.5 - Ø 10.5 - Ø 12.5
- Used to drill one or more holes on the bar.
- Can be used on laminate ranging from 20mm to 120mm width.
- Quick dies change for the various hole diameters.
- Can be used with column or hand drilling tool.
Code | Reference | Packing | Weight (Kg) | H (mm) | P (mm) | L (mm) |
---|
UBF1010 | UFB-BFX | 1 | 7,1 | 65 | 175 | 240 |