BOC
BOC1000
BOC1005-1010
BOC3000
BOC1000
BOC1000 allows direct connection on prepunched bars with 25 mm pitch. The distribution block allows attachment to bars of any thickness.
* 8 output splitter unit
The M8 screws must be tightened with a torque of 6 Nm. Screws not included.
The M8 screws must be tightened with a torque of 6 Nm. Screws not included.
← | → | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Code | Reference | A (mm) | B (mm) | C1 (mm) | |||||||||||
| + | BOC1000 | BOC RIP 8 * | 50 | 30 | 22 | ||||||||||
Specifications: |
|||||||||||||||
BOC1005-1010
BOC1005 and BOC1010 allow direct connection on prepunched, threaded or solid bars with two different installation configurations.
These distribution blocks can be attached to 5 or 10 mm thick bars.
** 8 output distribution unit + connection unit on thick bars. 5mm
*** 8 output distribution unit + connection unit on thick bars. 10mm
*** 8 output distribution unit + connection unit on thick bars. 10mm
The M8 screws must be tightened with a torque of 6 Nm. The M10 screws must be tightened with a torque equal to 10 Nm. Screws included.
← | → | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Code | Reference | A (mm) | B (mm) | C (mm) | C1 (mm) | D (mm) | ||||||||
| + | BOC1005 | BOC KIT 8 - 5 ** | 50 | 30 | 37 | 22 | 5 | |||||||
Specifications: |
||||||||||||||
| + | BOC1010 | BOC KIT 8 - 10 *** | 50 | 30 | 52 | 22 | 10 | |||||||
Specifications: |
||||||||||||||
BOC3000
Technical Characteristics
Distributor blocks are made of brass.
M6 and M4 grub screws included.
ADVANTAGES
- Quick and universal installation with a single product on threaded or pre-drilled bars of different types.
- Optimized design to maximize contact surface on profiled bars.
- Oblong holes suitable for direct fixing with M5, M6, M8 and M10 screws.
- Guided insertion of cables with stop to guarantee firmness of the connection.
- 8 outputs with or without terminal up to a maximum of 550 A total.
- Compact solution with minimal space requirement.
- Two different ranges of cable cross sections to adapt to different applications.
← | → | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Code | Reference | A (mm) | B (mm) | C (mm) | |||||||||
| + | BOC3000 | BOC-8X-550 | 69.5 | 35 | 13 | ||||||||
Specifications: |
|||||||||||||
Related products
The ΩWARE software facilitates the sizing of the electrical panel, saves time and minimizes the possibility of error
